Damazio family's RV-10 project
Fuselage kit inventorying
I spent a good 7 hours between inventorying the fuselage kit and putting away all the hardware (which involved reorganizing the hardware bins). Luckily, for the inventorying, I had help from friends:
Rick and Jay helped inventory all the parts :)
Rodrigo Damazio Bovendorp
April 22, 2018
Share to Twitter
Share to Facebook
Share to Pinterest
647 Rocking Horse Ct, San Jose, CA 95123, USA
Post a Comment
Post Comments (Atom)
Update on tailcone mods
Now that the tailcone is all drilled, I'm revisiting the mods I had planned to see what I need to do before primer. I made a previous po...
This is a long delayed post, but only now I got to write it. Since antennas are not part of the standard kit, I've been researching wh...
Empennage kit is here!!
After a grumpy FedEx delivery guy who kept complaining about the size and weight of the box, it's finally here! The box Crackin...
Bottom wing skins: pitot mount and flap gap fairing riveting
I replaced the bad rivets behind the inboard bottom wing skin with CR3212s (and one CR3242) as recommended by Van's, for much better res...
Research: empennage mods
Another two pieces of research on mods the empennage I've been looking at are fitting a camera to the top of the vertical stabilizer and...
Tailcone mods and considerations
As I start to build the tailcone (post on that later), I'm looking at what kinds of mods I need to top in addition to what's on the ...
Elevators almost ready to prime
While waiting for my wife to be back from vacation (to help me with bending the rudder leading edges), I did a lot of work on the elevators,...
We decided to build the wing stand following the plans posted by someone else: (can't find the original source of this to give credit...
Rudder part preparation
Worked on preparing (specially deburring) parts for the rudder today. Deburred parts I'm starting to think that the bench grinder ...
More tailcone riveting
1161 rivets later, I'm probably about halfway done in riveting the tailcone: Side skins mostly riveted I had a lot of help here, so...